# Faster Guid comparisons using Vectors (SIMD) in .NET

• Gérald Barré

This post is part of the series 'SIMD'. Be sure to check out the rest of the blog posts of the series!

Comparing Guids in .NET is a very common operation. The operation is simple, but there is a way to optimize it 😃 I've discovered it while reading the changes in this PR. The idea is to use SIMD instructions to compare Guids. I've wanted to explore SIMD and Vector for quite a long time. So, this was a good introduction. In this post, I'll explain how the optimization works.

## #How Guid.Equals() works

A Guid is a 128-bit value. If you look at the fields, you can see a mix of int, short, and bytes (source):

Guid.cs (C#)
``````public readonly partial struct Guid
{
private readonly int _a;
private readonly short _b;
private readonly short _c;
private readonly byte _d;
private readonly byte _e;
private readonly byte _f;
private readonly byte _g;
private readonly byte _h;
private readonly byte _i;
private readonly byte _j;
private readonly byte _k;
}``````

Here's the current `Guid.Equals` implementation from GitHub (comments are mine):

Guid.cs (C#)
``````public readonly partial struct Guid
{
public bool Equals(Guid g) => EqualsCore(this, g);

private static bool EqualsCore(in Guid left, in Guid right)
{
// Unsafe.AsRef returns a int pointer to the first field of the Guid structure
ref int rA = ref Unsafe.AsRef(in left._a);
ref int rB = ref Unsafe.AsRef(in right._a);

// Compare each element
// Unsafe.Add() returns a int pointer to the field at the specified offset
return rA == rB                                        // Compare [0:31] bits
&& Unsafe.Add(ref rA, 1) == Unsafe.Add(ref rB, 1)  // Compare [32:63] bits
&& Unsafe.Add(ref rA, 2) == Unsafe.Add(ref rB, 2)  // Compare [64:95] bits
&& Unsafe.Add(ref rA, 3) == Unsafe.Add(ref rB, 3); // Compare [96:127] int
}
}``````

Comparing each field is slow. So, the current implementation considers the Guid as 4 `int`s (4*32bits = 128bits) and compares them one by one. This optimization is unsafe, but as the structure is known and won't change, it's safe. Indeed, you can see that at runtime the fields in the struct are sequential and there is no padding. So, the comparison is the same as comparing 2 binary blobs.

Guid Layout
``````Type layout for 'Guid'
Size: 16 bytes. Paddings: 0 bytes (%0 of empty space)
|===========================|
|   0-3: Int32 _a (4 bytes) |
|---------------------------|
|   4-5: Int16 _b (2 bytes) |
|---------------------------|
|   6-7: Int16 _c (2 bytes) |
|---------------------------|
|     8: Byte _d (1 byte)   |
|---------------------------|
|     9: Byte _e (1 byte)   |
|---------------------------|
|    10: Byte _f (1 byte)   |
|---------------------------|
|    11: Byte _g (1 byte)   |
|---------------------------|
|    12: Byte _h (1 byte)   |
|---------------------------|
|    13: Byte _i (1 byte)   |
|---------------------------|
|    14: Byte _j (1 byte)   |
|---------------------------|
|    15: Byte _k (1 byte)   |
|===========================|``````

You can see the performance difference between comparing each field one by one and comparing the Guid as 4 `int`s:

MethodMeanErrorStdDevCode Size
Equals1.279 ns0.0446 ns0.0417 ns49 B
Equals_field_by_field3.497 ns0.0394 ns0.0349 ns119 B

## #Optimization using Vector128

Single Instruction, Multiple Data (SIMD) is a set of instructions that allows parallelizing code on a single core. In our case, we can use the "equal" instruction (single instruction) on 16 bytes (multiple data) simultaneously. SIMD is commonly used in the .NET code source for performance reasons. For instance, it helps in `string.IndexOf`, `Base64.EncodeToUtf8`, `HexConvert.EncodeToUtf16`, some query string manipulations, in the `BitArray` class, or for a sorting algorithm in the GC, etc. You can also find usages of SIMD in libraries such as ImageSharp.

In .NET, SIMD instructions are accessible through the `Vector<T>`, `Vector64<T>`, `Vector128<T>`, and `Vector256<T>` classes. These classes require hardware support to get performance improvements. You can check if your hardware supports SIMD by calling `IsHardwareAccelerated`. When the hardware is not supported, the `Vector<T>` classes fall back to software implementations. So, you can use them without any worries. However, it could be useful to check the support to use the best implementation for your hardware. Note that only a few native types, such as byte, short, int or long, are supported by `Vector<T>`. Starting with .NET 7, you can check if a type is supported by `Vector<T>` by calling `Vector<T>.IsSupported`.

You also use SIMD instructions by using raw methods. These methods are exposed in the `System.Runtime.Intrinsics` namespace. For instance, you can use `System.Runtime.Intrinsics.X86.Sse2.CompareEqual`. Before using these methods, you must check that the CPU supports them by using `IsSupported` because there is no software implementation fallback. This means that the method will throw if the hardware doesn't support them. For instance, you can use `System.Runtime.Intrinsics.X86.Sse2.IsSupported` before using SSE2 instructions.

When the JIT detect these methods, it replaces the method call by the equivalent assembly instructions. If you look at the C# code for methods in `System.Runtime.Intrinsics`, you won't see any useful code. The magic is in the JIT which knows these methods and handles them specifically!

C#
``````// The JIT replaces the condition with a constant based on the current CPU capabilities.
// So, it keeps only the supported branch when generating the assembly code.
if (Vector256.IsHardwareAccelerated)
{
// todo implementation using Vector256<T>
}
else if (Vector128.IsHardwareAccelerated)
{
// todo implementation using Vector128<T>
}
else if (System.Runtime.Intrinsics.X86.Sse2.IsSupported)
{
// todo implementation using System.Runtime.Intrinsics.X86.Sse2
}
else
{
// todo fallback implementation
}``````

In our case, we want to compare 128 bits of data. So, we use `Vector128<T>` to load the 128 bits of both `Guid`s and compare them. The code is more complex as you have to convert the `Guid` to a `byte*`. This is possible using `Unsafe.AsRef` and `Unsafe.As`.

C#
``````static class GuidExtensions
{
public static bool OptimizedGuidEquals(in Guid left, in Guid right)
{
if (Vector128.IsHardwareAccelerated)
{
// - Vector.LoadUnsafe loads 128 bits of data from the pointer
// - Unsafe.As casts the Guid pointer to byte pointer
// - Unsafe.AsRef(in left) returns a pointer to the value
// => This looks complicated and maybe slow, but
//    the JIT converts this line to a single asm instruction
Vector128<byte> leftVector =
ref Unsafe.As<Guid, byte>(
ref Unsafe.AsRef(in left)));

Vector128<byte> rightVector =
ref Unsafe.As<Guid, byte>(
ref Unsafe.AsRef(in right)));

// Compare both vectors
return leftVector == rightVector;
}
else
{
// Fallback for non-hardware accelerated platforms
return left == right;
}
}
}``````

The JIT converts the previous code to the following:

Assembly
``````; GuidEqualsBenchmark.Equals_Opt(System.Guid, System.Guid)
; Clear the xmm registers
vzeroupper

; Vector128<byte> leftVector = Vector128.LoadUnsafe(ref Unsafe.As<Guid, byte>(ref Unsafe.AsRef(in left)));
vmovdqu   xmm0,xmmword ptr [rdx] ; Move Unaligned Packed Integer Values to xmm0

; Vector128<byte> rightVector = Vector128.LoadUnsafe(ref Unsafe.As<Guid, byte>(ref Unsafe.AsRef(in right)));
vmovdqu   xmm1,xmmword ptr [r8]  ; Move Unaligned Packed Integer Values to xmm1

; Compare xmm0 and xmm1 and store the result in xmm0.
; Compare 128 bits (16 bytes) byte by byte:
; For each byte, if xmm0[i] == xmm1[i] then xmm0[i]=0xFF (8 bits to "1"), else xmm0[i]=0x00 (8 bits to "0")
vpcmpeqb  xmm0,xmm0,xmm1

; Move the result of the comparison to eax.
; xmm0 is 128 bits, eax is 32 bits. eax is filled using the following algorithm:
; eax[0] <- xmm0[7];
; eax[1] <- xmm0[15];
; (* Repeat operation for bytes 2 through 14 *)
; eax[15] <- xmm0[127];
; eax[31:16] <- ZERO_FILL;
vpmovmskb eax,xmm0

; Check if the result is all 1s
; 0FFFF is 16 bits set to 1
cmp       eax,0FFFF

; Set al to 0 or 1 according to the result of the preceeding cmp instruction
sete      al

; Return the result
movzx     eax,al
ret
; Total bytes of code 32``````

As you can see, the JIT removes the `if`/`else` block and only preserve the branch where `Vector128.IsHardwareAccelerated` as my system support it. It replaces three method calls with a single assembly instruction (`vmovdqu`). And the method is shorter in asm, so it increases the chance for the method to be inlined which slightly improves performance. Let's compare the performance of the original and the optimized methods:

Benchmark.cs (C#)
``````BenchmarkRunner.Run<GuidEqualsBenchmark>();

[DisassemblyDiagnoser(printSource: true, exportDiff: true)]
public class GuidEqualsBenchmark
{
[Benchmark]
[ArgumentsSource(nameof(GetGuids))]
public bool Equals(Guid a, Guid b) => a == b;

[Benchmark]
[ArgumentsSource(nameof(GetGuids))]
public bool Equals_Opt(Guid a, Guid b) => GuidExtensions.OptimizedGuidEquals(in a, in b);

public IEnumerable<object[]> GetGuids()
{
yield return new object[] { Guid.Empty, Guid.Empty };
yield return new object[] { Guid.Empty, Guid.NewGuid() };
yield return new object[] { Guid.NewGuid(), Guid.NewGuid() };

var guid = Guid.NewGuid();
yield return new object[] { guid, guid };
}
}``````
Machine configuration
``````BenchmarkDotNet=v0.13.1, OS=Windows 10.0.22000
AMD Ryzen 7 5800X, 1 CPU, 16 logical and 8 physical cores
.NET SDK=7.0.100-preview.2.22153.17
[Host]     : .NET 7.0.0 (7.0.22.15202), X64 RyuJIT
DefaultJob : .NET 7.0.0 (7.0.22.15202), X64 RyuJIT``````
MethodMeanErrorStdDevCode Size
Equals2.2564 ns0.0326 ns0.0305 ns87 B
Equals_Opt0.3842 ns0.0186 ns0.0174 ns32 B
Equals1.0837 ns0.0287 ns0.0269 ns87 B
Equals_Opt0.2317 ns0.0172 ns0.0161 ns32 B
Equals1.0880 ns0.0234 ns0.0207 ns87 B
Equals_Opt0.2787 ns0.0224 ns0.0209 ns32 B
Equals1.1011 ns0.0251 ns0.0222 ns87 B
Equals_Opt0.2724 ns0.0238 ns0.0211 ns32 B

## #Support .NET 6

The previous code works with .NET 7 which is currently in preview. .NET 7 provides more methods on `Vector` to support generic vector operations. If you want to support .NET 6, you can use direct intrinsic methods. Note that the following code is not as good as the generic implementation as it only provides optimizations using the `SSE2` instruction set. A better implementation would check other instruction sets and provide optimized code for them.

C#
``````// Works with .NET 6
// For .NET 7, use the previous implementation
static class GuidExtensions
{
public static bool OptimizedGuidEquals(in Guid left, in Guid right)
{
if (Sse2.IsSupported)
{
Vector128<byte> leftVector = Unsafe.ReadUnaligned<Vector128<byte>>(
ref Unsafe.As<Guid, byte>(
ref Unsafe.AsRef(in left)));

Vector128<byte> rightVector = Unsafe.ReadUnaligned<Vector128<byte>>(
ref Unsafe.As<Guid, byte>(
ref Unsafe.AsRef(in right)));

var equals = Sse2.CompareEqual(leftVector, rightVector);
var result = Sse2.MoveMask(equals);
return (result & 0xFFFF) == 0xFFFF;
}

return left == right;
}
}``````